Construction Safety Tools
16 tools across 4 areas. Each one fills in the browser, prints as a jobsite form, and names the section it answers to.
Fall protection and heights
4 tools · 4 guides · 2 comparisons
- Fall Protection Plan Template29 CFR 1926.502(k)
A written plan for leading-edge, precast and residential work where conventional systems are infeasible.
- Harness Inspection Checklist29 CFR 1926.502(d)(21)
Pre-use inspection for full-body harnesses, lanyards and connectors, point by point.
- Scaffold Inspection Checklist29 CFR 1926.451(f)(3)
Competent-person inspection before each shift, printable and dated.
- Ladder Safety Checklist29 CFR 1926 Subpart X
Portable and fixed ladder checks, angle rule and defect tagging.
Recordkeeping and incident reporting
4 tools · 5 guides · 1 comparisons
- OSHA 300 Log Template29 CFR 1904.29
A fillable log of work-related injuries and illnesses with case classification built in.
- TRIR Calculator29 CFR 1904.32
Total recordable incident rate from your case count and hours worked, with a benchmark read.
- Near Miss Report FormVoluntary — no OSHA form
Capture the close call before it becomes a recordable, in one page.
- Incident Report Form29 CFR 1904.29(b)(2)
First-report form for a jobsite injury, with witness and root-cause sections.
Permits, plans and programs
4 tools · 5 guides · 1 comparisons
- Job Hazard Analysis (JHA) TemplateOSHA 3071 (guidance)
Break a task into steps, name each hazard, and record the control before the crew starts.
- Confined Space Entry Permit29 CFR 1926.1204
A permit-space entry form with atmospheric readings, attendant and rescue lines.
- Lockout/Tagout Procedure Template29 CFR 1910.147
Machine-specific energy control procedure with isolation points and verification steps.
- Site-Specific Safety Plan Template29 CFR 1926.20(b)
The SSSP a general contractor asks for before you mobilise, section by section.
PPE, training and toolbox talks
4 tools · 4 guides · 2 comparisons
- Toolbox Talk Template29 CFR 1926.21(b)(2)
A one-page talk sheet with topic, key points, discussion and a crew sign-in.
- Construction Safety Checklist29 CFR 1926.20(b)(2)
A walk-the-site inspection checklist grouped by hazard, printable and dated.
- Safety Training Matrix29 CFR 1926 Subpart C
Track who is trained on what and when each certification expires.
- PPE Hazard Assessment Form29 CFR 1910.132(d)(2)
The written certification OSHA requires before you hand out equipment.